Ventline Vanair Trailer Roof Vent w/ 12V Fan - 6-1/4" Diameter - Smoke

Ventline RV Vents and Fans - VP-543SP

This roof vent uses a 12-volt fan to circulate air in motor homes and enclosed trailers, keeping interiors ventilated without compromising security. Rounded, plastic vent cover opens and closes with the simple spin of a handle.

Features:

• Roof vent's electric fan yields better air circulation than non-powered models, exhausting hot air while trailer or RV remains locked and secure
• Efficient 12-volt centrifugal blower design
  • Draws only 1-1/2 amps yet moves 100 CFM - low demand on battery
  • Quiet operation
• Easy, one-handed opening and closing of dome
• Translucent cover allows some light through
• Fan uses 12-volt DC power
• Low-profile plastic dome
• Butt connectors and ring terminals sold separately
• Made in the USA

Specs:

• Fan power: 12-volt DC
  • 100 CFM
• Cover color: Smoke
• Rough opening size: 6-1/4" diameter
• Vent extends above roof:
  • 2-3/8" Closed
  • 3-1/4" Open
• 1-Year warranty

Note: Screws and sealer are not included. See Installation Kit (RVIKIT100), which includes all necessary screws and sealer to install vent.

Note: Not for use above tubs, showers or range cooking surfaces.

Installation Instructions

1. Cut a 6-1/4" diameter rough opening through roof. (You can use the smaller diameter of the ceiling garnish as a template.)
2. Remove the two screws from the roof cap and then take off the cap for access to the mounting holes.
3. Apply sealant to bottom of flange. Be sure to surround each screw hole.
4. Make electrical connections.
5. Insert vent into the rough opening and align it correctly with the trailer. The flange is stamped "FRONT" on the part that should be oriented toward the front of the trailer or RV.
6. Mount to roof with #8 screws.
7. Insert ceiling garnish into opening and attach with #8 screws.

VP-543SP Ventline Vanair Trailer Roof Vent w/ 12V Fan - 6-1/4" Diameter - Smoke